Skip to content

How to Make Up a Baby's Bottle

Making up a bottle raises lots of questions for new parents. Although it's simple, it's a process that needs some care.
Step 1 - Wash your hands and equipment
Start by washing your hands and the equipment you'll be using very thoroughly. It's important that your hands stay clean throughout the whole process.
Step 2 - Boil the water
Boil drinking water for 5 minutes. Then leave it to cool for about 30 minutes, to around 40°C, and pour the amount of water you need into the bottle.

Our tip is to boil enough water for several bottles and keep it in a flask. Doing this saves you a lot of time at every feed. On the other hand, formula powder shouldn't be added to boiling water as it may lose some of its qualities. Boiling water can also warp the bottles.

Note that water that has been boiled once should not be boiled again.
Step 3 - Measure and add the formula
To measure the formula, always use the scoop that comes in the pack. The correct measures are level scoops. Don't press the powder down.

Add the recommended amount of formula powder to the water. You shouldn't change the number of scoops recommended, as this could harm your baby's health.
Step 4 - Close the bottle and shake
Close the bottle and roll it vigorously between your palms for 5 seconds. The bottle should be shaken as soon as possible after adding the formula so that the powder dissolves properly. Shake for another 20 seconds.
Step 5 - Check the temperature
Before giving the bottle to your baby, check its temperature by testing a few drops on the inside of your wrist. (It should be 37°C at most).

Tip: When you already have cooled boiled water, you can make up the bottle cold and warm it in a bottle warmer. This gadget is a great help, especially for night feeds. You can leave 2 or 3 bottles made up cold, so you only need to warm them when it's time to feed.
Article written by Dr Sara Brandão – Pharmacist and Technical Director of MaisBebé

Comments (0)

Be the first to comment on this article.